halftrackinfo
general discussion => ALL mechanical and technical related questions => Topic started by: emptyhead on February 22, 2016, 03:16:20 PM
-
Bought some seals of of epay but there wasn't a # on the package so I don't know if these are the right seals since I don't have any to compare to. Could someone tell m if these are correct. Thanks.
(http://i292.photobucket.com/albums/mm21/davidf121/image_zpsywrepjsr.jpeg) (http://s292.photobucket.com/user/davidf121/media/image_zpsywrepjsr.jpeg.html)
-
The O.D. on one of mine measures 3.190"
Gary
-
Check with Kevin Lockwood about bogie seals.
-
Thanks guys Imeasured it out and got od of 3.25 id 1.6 to 1.75 width .490.
I found this post and these are the measurements someone else gave on the g
I tried to cross the seal to National and Chicago rawhide.
Heres the part numbers in Ord. 8 and 9;
H013-0500102
Ord.# A-215316
C/R 10311-AA
These are crossed seals listed in Ord. 14-2,Vol.3, 5 June 1945
C/R 10311-AA
National 6078
Standard 43-929
Autocar 31W-235
Diamond-T N18312
White 380029
There is no direct cross.
I do not have one in front of me but by the picture in Ord 9 1 Dec. 1944 page 255 it looks like a double lip seal.
The dimensions are ; shaft 1-7/8 or 1.875 / OD 3.194 / width 45/64 or .703
C/R has one that fits the bore and shaft size but only .469 wide and single lip 18899
National has 5;
410092 .437 wide
450092 .437 wide
470092 .437 wide
473485 .375 wide
480092 .437 wide
Some of these are single lip and some are double some have inner case.
There are other seal manufactures out there, Maybe they can cross with the first numbers I listed.
What ever seals you use all lips have to face out or you will just push the seal out when you grease it.
Jeff
Jeff Jensen
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 443
Joined: Thu Aug 07, 2003 6:26 pm
Location: Excelsior, Minnesota
Ill send them back to the seller they are all wrong.again thanks