halftrackinfo

general discussion => what's on your mind? => Topic started by: steve1973 on January 18, 2018, 06:55:45 AM

Title: Brake Spring Bracket - Need Help
Post by: steve1973 on January 18, 2018, 06:55:45 AM

I'm getting ready to install my steering column and the return springs for the brake pedal and clutch. What I need is dimensions of the spring extension bracket that goes to the end of the spring to the brake pedal on the later style pedal assembly. This is the set up found on later halftracks. See photo below.

(http://www.surfacezero.com/g503/data/500/medium/steering_and_peddal_assembly_2.jpg)

I need the following:
length
width
thickness
distance between the two holes, center to center
diameter of each hole

OR, if anyone has a spare they are willing to sell, I'm interested. ;D

Thanks,

Steve A

Title: Re: Brake Spring Bracket - Need Help
Post by: yd328 on January 30, 2018, 07:27:10 AM

Steve,
Looking at the spring holder on mine, the two brackets are about the same size.  A difference in the bolt hole size seem to be different.

Gary