halftrackinfo

electrical system => wiring harnesses => Topic started by: steve-0 on January 20, 2011, 10:55:35 PM

Title: 10 Gang Terminal Block
Post by: steve-0 on January 20, 2011, 10:55:35 PM

the terminal block mounted in the engine compartment against the firewall is a 10 Gang Terminal Block. im still looking for a better match but this is what i have so far. click on screw type.
http://www.delcity.net/store/Terminal-Blocks/p_307.a_1


this should bolt right up. i think i will mill the tall dividers off.
http://www.colehersee.com/home/item/cat/274/M-429/

Title: Re: 10 Gang Terminal Block
Post by: Hinrik on February 04, 2012, 06:20:35 PM

Guys,

I bought mine NOS from David Yamulla: http://www.militaryvehiclesupply.net/

Think they were only $18 each. I bought 2. Bottom block is the one installed in my M2A1:


(http://i165.photobucket.com/albums/u58/HinniB747/DYamullaNOSwiringblock.jpg)

Title: Re: 10 Gang Terminal Block
Post by: steve-0 on August 03, 2014, 08:56:09 PM

i missed your post hinrik 
or i would have bought one of those



i bought one from mcmaster. the mounting holes even lines up with one of the top and bottom holes.
http://www.mcmaster.com/#7527k91/=t4ktm7


(http://www.surfacezero.com/g503/data/3760/medium/IMG_15514.JPG)

(http://www.surfacezero.com/g503/data/3760/medium/IMG_18304.JPG)