halftrackinfo

electrical system => wiring harnesses => Topic started by: andy on January 30, 2012, 08:35:12 AM

Title: Rear wiring harness M3 to M2
Post by: andy on January 30, 2012, 08:35:12 AM

Hey all,
I have seen a ton of M3 rear wiring harness's for sale lately. Will they work on an M2A1. I'm hoping the only difference is length?

Andy

Title: Re: Rear wiring harness M3 to M2
Post by: steve-0 on January 30, 2012, 09:00:05 PM

it should be fine. just 10" extra length.
some of the old harnesses are not worth installing. you may want to get a new harness from vintage.
http://www.vintagewiringofmaine.com/

Title: Re: Rear wiring harness M3 to M2
Post by: andy on April 05, 2012, 08:41:45 AM

Hey Steve, can you tell me if the rear wiring harness has the gas tank sending unit wires in it? that would be the only difference from m2 to m3 other than a bit longer than m2.

Quote from: steve-0 on January 30, 2012, 09:00:05 PM

it should be fine. just 10" extra length.
some of the old harnesses are not worth installing. you may want to get a new harness from vintage.
http://www.vintagewiringofmaine.com/

Title: Re: Rear wiring harness M3 to M2
Post by: steve-0 on April 05, 2012, 09:10:07 PM

the right hand tank sending unit wire is in the front harness and the left is in the rear harness.
http://halftrackinfo.com/index.php?topic=168.0


(http://www.surfacezero.com/g503/data/500/TM_9-1710C_2.jpg)

(http://www.surfacezero.com/g503/data/500/TM_9-1710C999.jpg)

Title: Re: Rear wiring harness M3 to M2
Post by: andy on April 06, 2012, 08:31:25 AM

Thanks Steve!.