halftrackinfo
electrical system => other stuff => Topic started by: Outsider on February 15, 2014, 07:28:23 AM
-
Here is what I believe is the wiring diagram I used to wire my ht. I thought others might be interested in how to add blinkers to there systems without adding additional lights.
(http://i1059.photobucket.com/albums/t427/sverburg/DSCN3322_zpsa166fe23.jpg)
The basics of this are:
1) Replace right tail light with a left side tail light.
2) Use the wire in the rear harness for the black out brake light as the right stop / turn wire.
3) add a wire in the front harness to the right blackout light.
4) take the cats eyes out of 2 old front blackout light lens and add yellow bulbs to the lights.
5) Add a wire from the left tail light to the right side for the "tail light" circuit.
Steve
-
Steve, what did you use as the turn signal switch?
I still have my main and rear wiring harness out of the track, so maybe might do this
andy
-
I used a Signal Stat 900. They are available at your hd truck parts outlets. They are a good commercial unit that has been made for many decades, and as such will take getting wet and other atrocities without burning up.
(http://i1059.photobucket.com/albums/t427/sverburg/DSCN3334_zps4afafaf0.jpg)
Steve