halftrackinfo
painting and paint/ rust removal => painting => Topic started by: scotty71 on July 17, 2015, 04:29:29 PM
-
I am nearly to the point of repainting my 160ax engine and would like some details as to what other people's procedures were in regards to what type of primer and type / colour that they used in the repainting of their engine.
From what I have read on some forums there is some contradiction of which way to do it and what paints are required to do this.
I have narrowed it down to a self etch hi temp primer and hi temp engine paint (Dupli colour / VHT ).
I will be going for the blue / grey colour for the colour finish.
I have seen that a small thread was started in this section about this subject, but would like a bit more detailed recommendations about paint colours used and best primer etc.
Thanks in advance.
Scott.
Ps. I will be taking photos of the resto of the engine and detailing the process on this forum when I get around to it.
-
any news about this as i get to the same point now and looking into paint colour