halftrackinfo

drive train => clutch => Topic started by: andy on July 13, 2012, 09:25:00 AM

Title: torq specs clutch plate
Post by: andy on July 13, 2012, 09:25:00 AM
Anyone have the torq for the clutch plate to the flywheel? before dropping in tranny would like to verify they are torq'd

Thanks,
Andy
Title: Re: torq specs clutch plate
Post by: colkking on November 12, 2018, 12:18:25 AM
I put them at 50 ft.lbs....i wasn't too comfortable putting much more on the grade 5 bolts.
Title: Re: torq specs clutch plate
Post by: Torque on November 12, 2018, 08:20:56 PM
A 3/8" pressure plate bolt should be torqued to 35 ft lbs.