halftrackinfo
armor plate => armor discussion => Topic started by: steve-0 on May 13, 2013, 02:53:01 PM
-
there are many more than this but i need to find a different way to post them
bob gillard gave me permission to post these
-
more
-
more
-
more
-
more
-
more
-
there are over 1000 items so im going to have to post the rest later. and also organize them.
bob gillard gave me permission to post these.
-
way cool thanks for the update and thank Bob for the info.
-
Wow Steve. This will ruffle some fethers. :o I've been sorting out what I got from him also. I don't have an auto CAD program to read the DXF files but I'm using my metal fabricator's computer to figure things out. I think most of what you have posted from what I can tell are scoutcar items. It gets confusing as there are duplicats and some that are batch jobs to be cut. I was looking for the M2 track armor but all he had on file was the outer dimentional for a cut blank, no holes. So, my metal fabricator measured out all the holes for all four track armor pieces on the driver's side including the two angle pieces and from that made a complete set. I went over yesterday to check hole allignment and it was good for the most part. We only had a few holes to fix. I have a listing at my shop what files go to which armor pieces that I have found. I plan on renaming the files to match the proper parts at some point. I do know that one of the footman loop hole sets fot the M3 tripod on the rear, left side is incorrect. I forget which set, upper or lower, needs to be fixed at this point. Everything else seems to be good.
Steve A.
-
Steve,
Thanks for taking the time to post these and thanks to Bob for sharing.
Reg
Hinrik
-
as i have said there are over 1000 files.
these need to be categorized and the jpg files need to be stored and linked through surfacezero.com or something http://g503.com/forums/viewtopic.php?f=34&t=16916
if they are just posted as jpg then the will open on my site, like you see with the pics above.
if anyone is interested in doing this i will email you the hole file.
-
Hi Steve,
I'm not sure if this still needs to be done, but I would like to help out if needed.
Rob