Trip meter drum

[Reed45]

Can anyone tell me how to remove the trip meter drum from the housing? I just don't want to break it.

Thanks,

Dave

[Monkeypirate]

You have to carfully pry the back of the bevel off and remove the glass. Then remove the neddle carfully by pulling it strait off. Remove the 2 screws holding the face plate on and the wheel cluster has a C clip on the gear side and a screw on the other side. Once those are off slide it to the rigjt to free the shaft and lift it out.

[Reed45]

This is how far I have it broke down

[Monkeypirate]

On the right side there should be a groove cut into the shaft with a clip holding the gear on. Use the needle nose pliers to push the clips open side off the shaft and it should slide out.