« previous next »
Pages: [1]

Author Topic: oil pressure and winch cable?  (Read 3542 times)

halftracknut

  • Full Member
  • ***
  • Posts: 102
oil pressure and winch cable?
« on: April 16, 2015, 09:45:10 AM »
how much and what type cable is required for winch? ....how much oil pressure is normal when warm for the ax 160?   thanks....
Logged

steve1973

  • Hero Member
  • *****
  • Posts: 1414
Re: oil pressure and winch cable?
« Reply #1 on: April 17, 2015, 02:55:39 PM »
The winch uses 5/8" cable and 220 feet of it. A lot of people use 1/2" cable which is a little cheaper. My halftrack runs between 20 and 40 psi of oil pressure.

Steve A.
Logged

steve-0

  • Administrator
  • Hero Member
  • *****
  • Posts: 1382
Re: oil pressure and winch cable?
« Reply #2 on: April 17, 2015, 06:57:08 PM »
Logged

halftracknut

  • Full Member
  • ***
  • Posts: 102
Re: oil pressure and winch cable?
« Reply #3 on: April 18, 2015, 12:55:18 PM »
thanks for the response ....my oil press is 40 cold and 35 hot....I will need to purchase more cable...thanks htn
Logged

scotty71

  • Guest
Re: oil pressure and winch cable?
« Reply #4 on: April 18, 2015, 02:47:35 PM »
TM 9-710, pg.29 - "Normal readings are from 4 to 8 psi with engine idling, and a maximum of 20 to 35 psi with engine running at operating speed".
Logged
Pages: [1]
« previous next »