« previous next »
Pages: [1]

Author Topic: Removing the tach  (Read 5916 times)

R.E.Co.

  • Sr. Member
  • ****
  • Posts: 292
Removing the tach
« on: July 01, 2016, 07:04:08 AM »
This is probably a stupid question but I took the bolt and nuts off the backside of the tach but I'm not sure how to remove it. Dose the tach remove from the front or from the back? Just don't want to break it. Thanks in advance.
Logged
1941 White M2
1941 Chevrolet G506 Civilian Dash
1941 Federal 94-43 4-5 Ton COE
1918 3 Ton Field Gun Trailer

col.halftrack

  • Sr. Member
  • ****
  • Posts: 382
Re: Removing the tach
« Reply #1 on: July 01, 2016, 07:26:34 AM »
Tach enters dash panel from the backside. So if you are in the drivers seat you should be able to push it out of the panel.
Logged
1941 White M2
1942 White M4A1 was M4
1942 Autocar M2A1
1942 Autocar M3-75
1943 White M13 rebuilt as M16
1943 Diamond T M3A1

R.E.Co.

  • Sr. Member
  • ****
  • Posts: 292
Re: Removing the tach
« Reply #2 on: July 01, 2016, 07:28:03 AM »
There is a lip around the face of the tach that keeps it in the dash. Do I need to use two screw drivers on each side of the tach and push it in at the same time?
Logged
1941 White M2
1941 Chevrolet G506 Civilian Dash
1941 Federal 94-43 4-5 Ton COE
1918 3 Ton Field Gun Trailer

Outsider

  • Hero Member
  • *****
  • Posts: 748
Re: Removing the tach
« Reply #3 on: July 01, 2016, 10:50:09 AM »
No screw drivers! One hand in front gently pushing and one hand behind gently pulling. Might help to twist it a little.

Steve
Logged
Lots of green "junk" as my wife likes to call it.
Friends don't let friends buy Trailking Trailers!

R.E.Co.

  • Sr. Member
  • ****
  • Posts: 292
Re: Removing the tach
« Reply #4 on: July 01, 2016, 11:01:27 AM »
Okay I will give that a try. Thanks.
Logged
1941 White M2
1941 Chevrolet G506 Civilian Dash
1941 Federal 94-43 4-5 Ton COE
1918 3 Ton Field Gun Trailer
Pages: [1]
« previous next »