Coil

[Crawford]

This is my first halftrack and it is already proving to be a very steep (expensive) learning curve and I would greatly appreciate some advice. There is a definite weakness in the coil and HT leads so I'm going to start with replacing the rather rusty coil. Can I use any suitable 12v coil of does it have to be a specific type?

I'm in the UK and it is a 1943 White M3A1.

Thanks 

[8683jb]

Mine has a standard 12V automotive coil. If you go on the forum, the third heading down, Steve-O has provided a list of interchangeable part numbers that's very helpful. You can cross-reference these as well. Congratulations on your first half track and good luck!
Jon

[steve-0]

http://halftrackinfo.com/index.php?topic=89.0

[Crawford]

Thank you, found the below in case anyone else in the UK is after one.


http://www.s-v-c.co.uk/product/svc-standard-12v-ignition-coil/