Author Topic: FT-284 design ??  (Read 1436 times)

brian in denver

  • Newbie
  • *
  • Posts: 41
FT-284 design ??
« on: September 13, 2017, 02:31:17 PM »
ok uploaded some stuff to radionerds.

http://www.radionerds.com/index.php/FT-284

as you can see by the original pic. the back feet sit on the angle iron that holds the side armor to the fender armor.
you can see the corner foot pads are L shaped. and that there is a shim under one part.
you can also see all three legs have slots in the back to clear the side armor nuts. (but none on the ends)
the drawing clearly shows the shimmed part of the L foot


BB
« Last Edit: September 13, 2017, 02:35:36 PM by brian in denver »

Tapper02

  • Sr. Member
  • ****
  • Posts: 487
Re: FT-284 design ??
« Reply #1 on: September 14, 2017, 07:41:20 AM »
Interesting Brian, and thanks for the pictures and drawings.  I haven't mounted mine yet, so there may be some modifications to my FT-284 before it goes in (it's a repro).

-Tom
1944 Autocar M15A1 (M16A1) Halftrack
  (Being restored to an M3A1 configuration)
  Serial Number M-15 A 1, 1356
  Model M-16 A 1, Ord Serial Number 1106
1944 Schelm Bros. M10 Ammunition Trailer
  Serial Number 16959
MVPA # 30507

brian in denver

  • Newbie
  • *
  • Posts: 41
Re: FT-284 design ??
« Reply #2 on: September 14, 2017, 09:08:42 AM »
I also note that on page 56 of the m3 manual it calls out a 1/2 hole drilled in one of the feet, not sure what thats for ?
maybe to shove it all the way into the back corner on the passenger side ?

BB
« Last Edit: January 12, 2021, 04:29:57 PM by brian in denver »

TeamMarine

  • Newbie
  • *
  • Posts: 24
Re: FT-284 design ??
« Reply #3 on: January 03, 2021, 05:21:38 PM »
Hey guys, working on tracking some parts down to get the SCR-528 mounted in the M3 and the FT-284 seems to be one of those pieces that kind of comes and goes.  Anybody know of a source for these?  Did a bunch of digging on the G and Tom Campbell was the last guy that was making them but he hasn't returned any emails.  Thanks for the help!!

TeamMarine

brian in denver

  • Newbie
  • *
  • Posts: 41
Re: FT-284 design ??
« Reply #4 on: January 12, 2021, 04:23:53 PM »
yah I worked with tom on those, they still didnt come out right.

I would suggest getting a hold of that nick guy.
he seems to like project like this.

BB

steve1973

  • Hero Member
  • *****
  • Posts: 1325
Re: FT-284 design ??
« Reply #5 on: January 12, 2021, 06:40:16 PM »
I have an original FT-284. I can take it to a fabricator to replicate if you want to pay for it and shipping. I'm not sure what it will cost but should be under $500 I think. It will be a while before I can dig the mount out though.

Steve A.

TeamMarine

  • Newbie
  • *
  • Posts: 24
Re: FT-284 design ??
« Reply #6 on: Today at 04:27:16 PM »
Thanks Steve, keep me posted and I'll keep looking for one until you get yours dug out.