Author Topic: looking for a couple of HT Parts  (Read 292 times)

mkoloc

  • Newbie
  • *
  • Posts: 30
looking for a couple of HT Parts
« on: February 11, 2020, 09:10:45 PM »
Looking for an original frame mounted  (AC) fuel filter.  This filter sits on the frame by the brake system and the fuel line running down from the fuel shutoff block.

Am also looking for Pedestal Mount headlight bulbs. Need 1 regular and one blackout bulb, 12 volt..original bulbs were Guide.

All and any help,appreciated.

Mark
Mark A.R. Koloc Sr.
LTC USA (RET)
1631 Bitter Creek Lane
Batavia, OH  45103
Cell:  715-821-9426

spillmk1

  • Full Member
  • ***
  • Posts: 152
Re: looking for a couple of HT Parts
« Reply #1 on: February 12, 2020, 05:36:15 AM »
1955 M38A1
1952 M100
1941 M2A1
MVPA Member

mkoloc

  • Newbie
  • *
  • Posts: 30
Re: looking for a couple of HT Parts
« Reply #2 on: February 12, 2020, 08:41:18 AM »
Thanks Keith!
Mark A.R. Koloc Sr.
LTC USA (RET)
1631 Bitter Creek Lane
Batavia, OH  45103
Cell:  715-821-9426

8683jb

  • Hero Member
  • *****
  • Posts: 593
Re: looking for a couple of HT Parts
« Reply #3 on: February 12, 2020, 08:44:47 AM »
I sent you a PM Mark.

Jon
'42 Autocar M2A1

MVPA member

Crawford

  • Newbie
  • *
  • Posts: 20
Re: looking for a couple of HT Parts
« Reply #4 on: February 12, 2020, 10:24:49 AM »
MV Spares make a very good reproduction, have no complaints so far ( sorry about the rotation of the photo!)
« Last Edit: February 12, 2020, 10:30:27 AM by Crawford »
1943 GPW
1943 Diamond T M3A1

Oxford, England

steve1973

  • Hero Member
  • *****
  • Posts: 1249
Re: looking for a couple of HT Parts
« Reply #5 on: February 12, 2020, 10:31:23 AM »
I may have a take off original for you. It will need to be restored. You can get the blackout light bulbs from Ron Fitzpatrick Jeep Parts. They are original 6V bulbs. The pedestal headlight bulb is part number 4411.

Steve A.

mkoloc

  • Newbie
  • *
  • Posts: 30
Re: looking for a couple of HT Parts
« Reply #6 on: February 12, 2020, 01:58:52 PM »
Steve that's what I'll do .. MV Spares it is ... my HT's system is 12 volt

Mark
Mark A.R. Koloc Sr.
LTC USA (RET)
1631 Bitter Creek Lane
Batavia, OH  45103
Cell:  715-821-9426

steve1973

  • Hero Member
  • *****
  • Posts: 1249
Re: looking for a couple of HT Parts
« Reply #7 on: February 12, 2020, 05:55:29 PM »
Mark,
Yes, halftracks are 12V but the blackout drive light is 6V. That is why there is a resistor in that wiring circuit. The resistor is usually located somewhere around the overflow tank or under the dash. The drive head light on the other hand is 12V and the bulb number I gave you is 4411. Another example is if you tow a trailer the voltage needs to be dropped to 6V as all trailer tail lights are 6V. Ron Fitzpatrick also carries the complete fuel filter assembly and a conversion to paper element.

Steve A.

mkoloc

  • Newbie
  • *
  • Posts: 30
Re: looking for a couple of HT Parts
« Reply #8 on: February 12, 2020, 06:52:35 PM »
Thank you Steve  ..that makes sense ...I'll have to look at my wire diagram, missed the resistor in the front, know about the one in the back ..
Mark A.R. Koloc Sr.
LTC USA (RET)
1631 Bitter Creek Lane
Batavia, OH  45103
Cell:  715-821-9426