Author Topic: Perimeter rail front corner gussets  (Read 381 times)

WayOffTrack

  • Hero Member
  • *****
  • Posts: 525
Perimeter rail front corner gussets
« on: March 13, 2020, 02:33:19 AM »
Found a piece of metal I think might be a gusset for one of the front corners, I've seen a couple different styles. One style mounts underneath and is welded in (seen 2 variations of this underneath one) and one that is bolted with 4 half inch hex bolts that sits on top. Anyone have pics, this is the one I found on the left, made 2 more to match but not sure they are correct.


yd328

  • Hero Member
  • *****
  • Posts: 667
Re: Perimeter rail front corner gussets
« Reply #1 on: March 13, 2020, 05:25:57 AM »
I have that plate on mine. They are on the top of the rail in the front corners. I’m not sure if they were put there to help support the pulpit. They were both bolted and welded.

Gary

spillmk1

  • Full Member
  • ***
  • Posts: 173
Re: Perimeter rail front corner gussets
« Reply #2 on: March 13, 2020, 05:41:45 AM »
Here's a shot of mine.
Plate bolted from below on each side.

Keith
1955 M38A1
1952 M100
1941 M2A1
MVPA Member

WayOffTrack

  • Hero Member
  • *****
  • Posts: 525
Re: Perimeter rail front corner gussets
« Reply #3 on: March 13, 2020, 12:38:05 PM »
Thanks guys! :)

Darth_Kitten

  • Sr. Member
  • ****
  • Posts: 275
Re: Perimeter rail front corner gussets
« Reply #4 on: March 16, 2020, 05:36:39 PM »
would it be possible to share the dimensions of these so I can make a copy?
Thanks,
Mark

WayOffTrack

  • Hero Member
  • *****
  • Posts: 525
Re: Perimeter rail front corner gussets
« Reply #5 on: March 16, 2020, 08:13:20 PM »
Sure I will get some dimensions for you, it is an odd shape.

Darth_Kitten

  • Sr. Member
  • ****
  • Posts: 275
Re: Perimeter rail front corner gussets
« Reply #6 on: March 17, 2020, 07:49:52 PM »
Thanks!