Author Topic: Need some M2 rear compartment drawings  (Read 2215 times)

Torque

  • Full Member
  • ***
  • Posts: 163
Need some M2 rear compartment drawings
« on: March 05, 2014, 08:04:00 PM »
I need the drawings for the plates just to the rear of the troop seats that the fuel lines go down through. Also the left and right plates to the front of the seats that the ammo boxes set on (not the armor). Thanks to whoever this picture belongs to. Barry

steve1973

  • Hero Member
  • *****
  • Posts: 1096
Re: Need some M2 rear compartment drawings
« Reply #1 on: March 05, 2014, 08:07:15 PM »
That is a picture on my floor. I will add it to the list of drawing to make. I'm still under the weather with a cold so be patient.
Thanks,
Steve A.

Torque

  • Full Member
  • ***
  • Posts: 163
Re: Need some M2 rear compartment drawings
« Reply #2 on: March 05, 2014, 08:45:52 PM »
Thanks Steve, no hurry. Your pictures are some of the best, a huge help. Thanks, Barry

spec4don

  • Hero Member
  • *****
  • Posts: 790
Re: Need some M2 rear compartment drawings
« Reply #3 on: March 06, 2014, 12:15:54 PM »
Remember to put the floor plates in before you button up the back......Right Steve?

Don G.
1941 M2A1 not restored
1942 M3 Diamond T Mostly restored
1943 M3A1 Under restoration
1967 M51A2 Tractor
1945 WC 63 needs restoration
1967 M36 Long wheel base duece
1951 M135 GMC Fire truck conversion

Torque

  • Full Member
  • ***
  • Posts: 163
Re: Need some M2 rear compartment drawings
« Reply #4 on: March 23, 2014, 10:01:56 AM »
Steve,  If you get in the mood to measure stuff I also need the dimensions of that rear armor connector plate, the one in the photo between the lower and middle rear armor (don't need holes just overall). Thanks, Barry

Sprouse

  • Newbie
  • *
  • Posts: 45
Re: Need some M2 rear compartment drawings
« Reply #5 on: December 27, 2016, 04:41:29 PM »
did you ever measure the lower bed out?
WC 63 Restored
M2 not restored
M2A1 early not restored
M2A1 late not restored
M2A1 late not restored

steve1973

  • Hero Member
  • *****
  • Posts: 1096
Re: Need some M2 rear compartment drawings
« Reply #6 on: December 27, 2016, 07:34:21 PM »
Steve,  If you get in the mood to measure stuff I also need the dimensions of that rear armor connector plate, the one in the photo between the lower and middle rear armor (don't need holes just overall). Thanks, Barry

Not sure which plate you are talking about.

steve1973

  • Hero Member
  • *****
  • Posts: 1096
Re: Need some M2 rear compartment drawings
« Reply #7 on: December 27, 2016, 07:36:14 PM »
did you ever measure the lower bed out?

I have no drawings of the sheet metal center area with the chain lockers. I tried to find someone to do this when I had it completely stripped down but no luck.

Steve A.