carburetor base spacer

[steve-0]

carburetor base spacer, the original has two holes and this one has just one big hole. this works fine but if you have a better part number let me know. victor G14140
 http://www.victorreinz.com/index.html

http://northernautoparts.com/ProductModelDetail.cfm?InventoryId=238764

[scotty71]

I have located a source for "NEW" carb base spacers on ebay. It comes with the spacer two gaskets and studs and nuts. there are two versions of the same kit. One has the standard height spacer the other has a 1/2" sapcer. I'm not sure what is the correct thickness that is required.

Standard - http://www.ebay.com/itm/Stromberg-WW-Small-Rochester-2G-Holley-2110-Carb-Spacer-Phenolic-Insulator-Riser/231226613439?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222008%26algo%3DSIC.MOTORS%26ao%3D1%26asc%3D22847%26meid%3D6782340192712323169%26pid%3D100011%26prg%3D9835%26rk%3D1%26rkt%3D10%26sd%3D260962122514

1/2" spacer - http://www.ebay.com/itm/Stromberg-WW-Small-Rochester-2G-Holley-Carb-Spacer-Phenolic-Insulator-Riser-1-2/231226449441?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222008%26algo%3DSIC.MOTORS%26ao%3D1%26asc%3D18996%26meid%3D6771874931176684931%26pid%3D100011%26prg%3D8580%26rk%3D1%26rkt%3D10%26sd%3D231142671956

[BombFarm]

Thanks. I thought that was a great price, and all the parts in one lot.
I went for the 1/2" one, but a heads up.... It was the last one that was listed. Don't fear though, they have a direct phone number on their auction listings, and it sounds like they'd be happy to put any package together that you need.

[scotty71]

He has listed more on ebay. I have updated the link.

Scott.

[steve-0]

the original spacers where 3/8" thick.
the 1/4 or 1/2 inch should be fine. if you use the 1/2" then the  nuts will be flush with the top of the original studs.
new studs are included in these kits though

you can also get them from his website.
http://www.dashman.net/product.html?id=209

i think he is just repackaging canton spacers.
Canton Racing Products Number 85-032
http://www.summitracing.com/parts/ctr-85-032/overview/

https://www.google.com/search?client=safari&rls=en&q=Canton+Racing+Products%0AManufacturer's+Part+Number:85-032&ie=UTF-8&oe=UTF-8#q=Canton+85-032&rls=en&tbm=shop&tbs=vw:l,p_ord:p


original studs
Auveco  number 9677
side one 5/16"-24 SAE x 1"  side two 5/16"-18 USS x 9/16"   over all 2" package quantity 10

some available on ebay
http://www.ebay.com/itm/10-DOUBLE-END-STUD-5-16-24-SAE-x-1-5-16-18-USS-/230582991648?_trksid=p2054897.l4275

https://www.google.com/search?q=3/8+carb+Spacer+canton&client=safari&rls=en&source=lnms&sa=X&ei=P7eXU5XVH8zeoAS8lYGYDg&ved=0CAUQ_AUoAA&biw=1196&bih=618&dpr=1#q=Auveco++number+9677&rls=en

if you are running the thicker 1/2" spacer it will come with longer studs. but here is an option for them
Auveco  number 14824
 you will have to trim these down about 7/16"
side one 5/16"-24 SAE x 1-5/8" side two 5/16"-18 USS x 1/2" overall 2-1/2"

[yd328]

Steve,
I just received the canton spacer from summit and it won't work, its to big. I'll try one of the others.

Gary

[steve-0]

interesting

they both say they fit the 2G holly.


also i cant tell by the previous posts if someone has bought    AND   installed this ebay spacer

[scotty71]

I bought the 1/4" spacer and the 1/2' spacer from the ebay seller to test fit the parts and both fit perfectly to the intake manifold. I have taken photos of just the test fitting of both the 1/4 and 1/2 inch spacers and you can decide for yourselves which size you wish to use.

[yd328]

Scotty,
Thanks for the pics, I will contact dashmans this week.

Gary