Author Topic: throttle cable bracket  (Read 1565 times)

andy

  • Sr. Member
  • ****
  • Posts: 369
throttle cable bracket
« on: April 29, 2014, 08:07:50 PM »
Anyone have a pic of the bracket on the carb for the throttle cable. Im hooking up the cables from the dash and it seems there should be one,

Thanks,
Andy
1943 M4A1 (restored to M2A1)

col.halftrack

  • Sr. Member
  • ****
  • Posts: 308
Re: throttle cable bracket
« Reply #1 on: April 30, 2014, 08:18:05 AM »
http://www.mcmaster.com/#96995a160/=rdd1fz
 try this link it was posted in this section in a thread about throttle return springs.
1941 White M2
1942 White M4A1 was M4
1942 Autocar M2A1
1942 Autocar M3-75
1943 White M13 rebuilt as M16
1943 Diamond T M3A1

andy

  • Sr. Member
  • ****
  • Posts: 369
Re: throttle cable bracket
« Reply #2 on: April 30, 2014, 12:48:12 PM »
Thanks, I need that too, but im looking for a pic of the bracket that holds the cable for the throttle cable from the dash to the carb.
1943 M4A1 (restored to M2A1)

autocar925

  • Jr. Member
  • **
  • Posts: 65
Re: throttle cable bracket
« Reply #3 on: April 30, 2014, 09:46:03 PM »
I just happen to be working on the carb so I got a pic.  I'll try to post from my computer tomorrow. Brkt is flat steel strip 3/4" wide with hole spacing 2 5/8. One hole for 1/4 bolt other 5/16 bolt. Carb end angled to contour around carb baseplate. Strip appears to be about .10 thick whatever gage that is(10?)

BombFarm

  • Newbie
  • *
  • Posts: 37
Re: throttle cable bracket
« Reply #4 on: May 01, 2014, 08:33:01 AM »
Although you can't see the back of the carb where the bracket mounts, at least you can see most of the bracket itself. I hope between autocar925's description and this picture you will get what you need.
*Picture from Tim Sutter's M2.

autocar925

  • Jr. Member
  • **
  • Posts: 65
Re: throttle cable bracket
« Reply #5 on: May 01, 2014, 10:18:42 AM »
Bracket

andy

  • Sr. Member
  • ****
  • Posts: 369
Re: throttle cable bracket
« Reply #6 on: May 01, 2014, 11:34:22 AM »
Perfect guys a big thanks!
Andy
1943 M4A1 (restored to M2A1)