halftrackinfo

seats => all seat topics => Topic started by: andy on September 06, 2014, 05:33:27 PM

Title: passenger seat tilt stop
Post by: andy on September 06, 2014, 05:33:27 PM

On the passenger seat there is a lever that stops the seat from going too far forward. Does anyone have a pic of the bracket that it attaches to under the floor? I need to make one

Andy

Title: Re: passenger seat tilt stop
Post by: bright87 on September 17, 2014, 09:28:10 PM

Is this it? I was wondering what it was for.
Michael

Title: Re: passenger seat tilt stop
Post by: andy on September 18, 2014, 05:05:36 AM

Great thank you

andy

Title: Re: passenger seat tilt stop
Post by: Darryl L on September 18, 2014, 01:10:49 PM

Hi all,

I need one of these stays for my scout car commander's seat. Does anyone have a current source for a replacement one?

Title: Re: passenger seat tilt stop
Post by: andy on September 18, 2014, 01:14:27 PM

It looks pretty simple to make, what isnt is the lever between that bracket and seat.

Andy

Title: Re: passenger seat tilt stop
Post by: Darryl L on September 19, 2014, 07:39:24 PM

Hi Andy

Yes, it is the whole thing I need.  It looks like an old window stay to me but my searches around demolition yards and house recycling yards have been without success so far.

I wondered if there was a modern equivalent available.

Title: Re: passenger seat tilt stop
Post by: andy on September 20, 2014, 07:55:30 AM

Do you need a pic of the lever? I have one not installed yet

Andy

Title: Re: passenger seat tilt stop
Post by: Darryl L on September 20, 2014, 12:59:17 PM

Hi Andy

If you have a picture handy, that would be great, thanks.

Title: Re: passenger seat tilt stop
Post by: andy on September 21, 2014, 09:40:21 AM

here are some close ups. LMK if you need more measurements. I will be installing in the next few days though. There is a little push button to lock/unlock but in a pinch you could probably not bother with it if your making something yourself to work

Andy

Title: Re: passenger seat tilt stop
Post by: Darryl L on September 22, 2014, 03:07:29 PM

Hi Andy

That's great.  Thanks for doing all of that. That will give me enough to have a go at making something up.