halftrackinfo

seats => all seat topics => Topic started by: emptyhead on April 03, 2017, 06:25:22 AM

Title: Passenger seat placement
Post by: emptyhead on April 03, 2017, 06:25:22 AM

Anyone have a measurement on the seat placement for the passenger side seat on an m3. There where thre sets of holes drilled into the crossmember so don't know where it goes if someone has a measurement handy that would be great. Also if someone has pics and rough dimension of th two small hinges that would be great. Thanks

Title: Re: Passenger seat placement
Post by: beerman on April 03, 2017, 07:46:54 AM

If you give me a day or two, I can get you both pictures and measurements. I am out of town at work and will be traveling home tomorrow. I have both my seat and cross member removed for painting and repair, so it will be easy.

Thanks, Jeff

Title: Re: Passenger seat placement
Post by: emptyhead on April 03, 2017, 09:24:42 AM

Thanks got nothing but time.

Title: Re: Passenger seat placement
Post by: beerman on April 07, 2017, 08:54:00 PM

Well I finally got the pictures to upload. Had to use my phone again, I am at war right now with my local internet service. If you need anything else let me know. I will add that the cross member and the seat are not original to each other. So some where there must be some original measurements. I also have a scout car passenger seat and the hinges were a bit smaller, but the hole spacing matched.
Thanks, Jeff
http://www.surfacezero.com/g503/showgallery.php?cat=4102

Title: Re: Passenger seat placement
Post by: emptyhead on April 09, 2017, 05:52:27 AM

Thank you very much Jeff much appreciated