halftrackinfo

general discussion => ALL mechanical and technical related questions => Topic started by: Machman on May 29, 2017, 04:02:58 AM

Title: Front Roller brackets
Post by: Machman on May 29, 2017, 04:02:58 AM

Hi,
could someone give me the dimensions of the front roller brackets as shown in this diagram?
A=
B=
C=
D=
E=
F=
etc,
(http://www.frontline-sedgefield.co.uk/attractions/bracket.jpg)

thaks in advance

Title: Re: Front Roller brackets
Post by: Machman on May 30, 2017, 10:16:13 AM

I'm in the UK and mine are shot so having a pair fabricated if anyone can help ? :)

Title: Re: Front Roller brackets
Post by: yd328 on May 31, 2017, 07:41:55 AM

Here are the dimensions off my brackets. On the A,B and E measurements I went to the beginning of the radius, not the center of it.
A=28 1/8"  B=9 1/4"  C=12 7/8"  D=4 1/2"  E=4 3/4"  F=37 1/4"   Sorry no metric ruler  ;D

Gary

Title: Re: Front Roller brackets
Post by: 8683jb on May 31, 2017, 01:21:47 PM

If it helps, the edges on mine have an outside radius of 11/16", about 17.5 mm.

Title: Re: Front Roller brackets
Post by: Machman on June 28, 2017, 02:07:02 PM

Thats brillaint chaps, having some made tomorrow :)

Many thanks.

Title: Re: Front Roller brackets
Post by: Machman on July 12, 2017, 12:39:35 PM

(http://scontent-lht6-1.xx.fbcdn.net/v/t1.0-9/19748355_10213181930844369_7179457940434951025_n.jpg?oh=60325a62a73485167f4eadc2858a479c&oe=5A060B0B)

All done, just need the other bits :)

Title: Re: Front Roller brackets
Post by: 8683jb on July 12, 2017, 02:35:18 PM

Those came out nice. Good job!

Title: Re: Front Roller brackets
Post by: robbert on July 13, 2017, 10:35:37 AM

Nice job, is it a international halftrack