halftrackinfo

drive train => cooling system => Topic started by: WayOffTrack on June 08, 2017, 01:40:49 PM

Title: Uh oh
Post by: WayOffTrack on June 08, 2017, 01:40:49 PM

I guess there are two kinds of lower radiator tube. I might have a modified winch model on a roller model. Anyone have pics of both?

Title: Re: Uh oh
Post by: yd328 on June 09, 2017, 08:01:42 AM

Here's a couple.
(http://www.surfacezero.com/g503/data/500/medium/IMG_45243.JPG) (http://www.surfacezero.com/g503/showphoto.php?photo=238725&title=img-45243&cat=500)

(http://www.surfacezero.com/g503/data/500/medium/IMG_45233.JPG) (http://www.surfacezero.com/g503/showphoto.php?photo=238724&title=img-45233&cat=500)

Gary

Title: Re: Uh oh
Post by: WayOffTrack on June 09, 2017, 09:42:45 AM

Wow those are pretty. The one on my roller model M16A1 is like the one on top it has the big bend. Assuming that is really a winch type?

Thanks Gary!

Title: Re: Uh oh
Post by: steve1973 on June 09, 2017, 11:11:29 AM

The one on top is for a winch model and the one on the bottom is for a roller modern. The one on the bottom has been repaired or modified.

Steve A.

Title: Re: Uh oh
Post by: WayOffTrack on June 09, 2017, 05:09:04 PM

Thanks guys.

Title: Re: Uh oh
Post by: yd328 on June 09, 2017, 06:36:40 PM

Nice and pretty, can't  bring my self to paint the brass yet ;D.

Gary

Title: Re: Uh oh
Post by: WayOffTrack on June 10, 2017, 07:01:10 AM

For what it's worth you can use a winch lower pipe on a roller model but not the other way around. My only winch model halftrack arrived without the winch driveshaft or the lower rad tube installed so I had no clue.

Title: Re: Uh oh
Post by: Prc148 on January 18, 2019, 04:37:33 PM

Does anyone bend these? I might need one for a winch M3.