halftrackinfo

brakes => all brake related topics => Topic started by: col.halftrack on January 25, 2011, 04:27:18 PM

Title: Rear Brake Hose vs all Tubing
Post by: col.halftrack on January 25, 2011, 04:27:18 PM

 Anyone know when the rear brake hose was used. I have looked at two of my White tracks and one has the hose the other uses all steel tubing. I will look at the other tracks tomorrow.
 Thanks

Title: Re: Rear Brake Hose vs all Tubing
Post by: steve-0 on January 25, 2011, 07:20:48 PM

the m2 short frame used the hose and the long frame (m3, m16) had all steel. im only basing this on the halftracks i have here so i could be wrong.

Title: Re: Rear Brake Hose vs all Tubing
Post by: col.halftrack on January 26, 2011, 09:11:25 AM

 Makes sense. The White M2 has the hose and my White M16 has all tubing. I will check the others I have and see if this works out.
 

Title: Re: Rear Brake Hose vs all Tubing
Post by: Dinadin on January 26, 2011, 05:54:51 PM

For what is worth my M3 had tubing.

Title: Re: Rear Brake Hose vs all Tubing
Post by: yd328 on January 20, 2013, 10:46:35 AM

Rear brake hose is NAPA # 4900, on a M2A1

Gary

Title: Re: Rear Brake Hose vs all Tubing
Post by: spec4don on January 20, 2013, 02:50:01 PM

Since my frame was stretched they put all steel in but I'm going back with rubber but the hose connection on the M2 I robbed it off was a different size then my M3

Don G.

Title: Re: Rear Brake Hose vs all Tubing
Post by: yd328 on January 20, 2013, 09:22:04 PM

Don, if you are refering to the length the counter guy said there were a couple of different lengths availible.

Gary

Title: Re: Rear Brake Hose vs all Tubing
Post by: spec4don on January 21, 2013, 01:34:26 PM

Hi Gary, I should of clarified the fitting on my M3 is 1/2" and the one off the doner M2 was 7/16 and guys it is an obsolete thread pitch according to the the hose place.

Don G.