halftrackinfo

roller and winch bumper and winch related items => roller => Topic started by: p3aflyer on August 19, 2019, 08:52:30 PM

Title: Roller axle shaft measurements
Post by: p3aflyer on August 19, 2019, 08:52:30 PM

I have tried to find this info on here but no luck!! Looking for anything I can not find ,  I  am always told if it were a snake if would have bitten me!! 

Can anyone verify the length of the axle shaft and the center to center of the large tapper pin holes on a roller axle shaft?

I have 38 11/16 for he length and 36 5/8 for the center to center of larger of the taper holes?

Title: Re: Roller axle shaft measurements
Post by: Smadge on August 20, 2019, 01:49:21 AM

I’ll measure when I get home this evening.

Paul

Title: Re: Roller axle shaft measurements
Post by: Smadge on August 20, 2019, 06:14:27 PM

I have the length of the shaft a little longer at almost 38 3/4. See photo.  From The ENDS the 3/8” holes are in 1  1/8” centered.  The holes in the shaft are not tapered on mine and I will have to drill them out a bit in order for the tapered pin to fit.

Hope this helps.

Paul

Title: Re: Roller axle shaft measurements
Post by: p3aflyer on August 20, 2019, 08:39:32 PM

Thanks Paul ,  that helps. The one I measured Had shrunk a little due to hammering of the ends?

Wonder why the holes on yours are not tapered?

Title: Re: Roller axle shaft measurements
Post by: Selliott on August 22, 2019, 10:07:45 PM

Can someone give me the thickness of the shaft itself?

Thanks

Title: Re: Roller axle shaft measurements
Post by: p3aflyer on August 22, 2019, 11:47:21 PM

I believe 1.500, or  one and a half inches .  There might be a plus or minus torerance so check your roller guides to make sure . 

Title: Re: Roller axle shaft measurements
Post by: usfm on August 24, 2019, 01:07:29 AM

Hi,
Is it possible to post a picture of the complete shaft?
Thank you,

Christian

Title: Re: Roller axle shaft measurements
Post by: Smadge on August 24, 2019, 02:10:58 PM

Christian,

Photo attached. Shaft is 1 1/2” dia.

Paul

Title: Re: Roller axle shaft measurements
Post by: usfm on August 24, 2019, 11:11:36 PM

Thank you!

Title: Re: Roller axle shaft measurements
Post by: Selliott on August 25, 2019, 08:46:26 PM

Yes thank you !