halftrackinfo
drive train => engine => Topic started by: ezmoneychuck on September 26, 2019, 06:01:50 PM
-
Should there be a gasket where the pump bolts to the block? Trying to solve a low oil PSI issue.
Thanks
-
I just checked all the manuals and did not see a gasket between the pump and block.
-
There is a spring in the oil pump that regulates the oil pressure. check to see if this spring is broken or collapsed. The specs. should be in the tech manual.
-
Just checked for my own, and there is a gasket between the pump and block. It is in the parts manual but without drawing on page 73 all the way down they refer to it.