halftrackinfo
drive train => front and rear differentials => Topic started by: Smadge on March 01, 2020, 05:05:02 PM
-
Taking apart my front axle and there is a thick rubber seal just behind the inner wheel bearing. The one on the left side is completely deteriorated. The Ord 9 does not show this seal. Any help would be appreciated.
Thanks,
Paul
-
The seal is separate from the bearing. Here is one I found on eBay.
https://www.ebay.com/itm/Halftrack-G102-OIL-SEAL-FRONT-WHEEL-BEARING-NOS/123874654962?hash=item1cd7813af2:g:vGwAAOSwYhJdVCHs
Steve A.
-
That was quick!! THANKS a million Steve.
Paul
-
I have most all Half-Trac drivetrain parts, I have these seals and all bearings. email Colonel Halftrack at kplockwood@cox.net
-
Guys,
What is the easiest way to remove that rubber seal?
There really isn't a lip to remove it with a seal puller....sort of confused here.
thanks,
kk
-
Figured it out...the old fashioned "hammer and screwdriver" method.
;D