halftrackinfo

drive train => ignition system => Topic started by: mkoloc on March 11, 2020, 09:12:58 AM

Title: AMP Meter Wiring
Post by: mkoloc on March 11, 2020, 09:12:58 AM

The wire schematic on the amp gauge shows one wire from battery on one lug and all others on the other lug .. my amp meter did not any markings on the cardboard tag (+ -) so I assumed the battery cable goes on the positive side of the meter and all others on the negative side ....so as your sitting in the cab looking at the meter, that would be positive on the right lug .. is that correct? 

Title: Re: AMP Meter Wiring
Post by: 8683jb on March 11, 2020, 10:50:15 AM

If you were sitting in the seat and pulled the cluster out of the dash, the battery cable would be on the left and all the others on the right.

Title: Re: AMP Meter Wiring
Post by: mkoloc on March 11, 2020, 12:16:15 PM

Thank you .. WD sucks!!!!

Title: Re: AMP Meter Wiring
Post by: mkoloc on March 11, 2020, 01:35:24 PM

Flipped the wires and reinstalled the cluster LOL .. just waiting for some new bulbs and then I'll drop the speedometer in and all new dash harness will be done .. I finally have headlights, blackout lights etc.