halftrackinfo
armor plate => front armor (doors forward) => Topic started by: coreyelliott on April 05, 2020, 11:43:52 PM
-
On Lucky 13, we are trying to fit our pioneer tools on the driver's side. There doesn't seem to be any way to insert the pick mattock into the holder when the jerry can holder is in place. Did they modify the pick mattock holder once the jerry cans were installed? Maybe they bent or cut down the front vertical part of the pick mattock holder?
Corey
(http://www.surfacezero.com/g503/data/500/medium/IMG_33642.jpg)
-
Hope I’m not reading your post wrong but It should fit behind the holder.
-
It will fit.
To put it in...put the top tip under the holder then slide it backwards until the handle is in the rear holder then position it so the front of the handle will fit behind the stop and rotate it down into the locked position. Now the head has to be in the correct position on the handle to make it all fit. I had to play with mine for a while the first time to get it to go, but it will go when the head is in the correct position on the handle.
Steve