halftrackinfo

drive train => clutch => Topic started by: mkoloc on August 16, 2020, 08:19:30 AM

Title: Pulling Trany
Post by: mkoloc on August 16, 2020, 08:19:30 AM
Has anyone dropped their trany without pulling the engine?  I pulled my transfer case without pulling the engine without to much difficulty... hoping I can pull my trany the same way.  Would drop the transfer case before pulling to alleviate some of the weight.  Just wondering....
Title: Re: Pulling Trany
Post by: 8683jb on August 16, 2020, 09:04:05 AM
I made a support to replace the pad on a large floor jack and removed the transmission and transfer case together. Once lowered, roll them back as far as you can and there's room to service the clutch and flywheel. Make sure your jack has a wide enough footprint and your support is stable. And of course don't let any part of you get under it.
Title: Re: Pulling Trany
Post by: mkoloc on August 16, 2020, 09:31:59 AM
Will do..looked at your other posting, does not look that complicated to drop, and I'll be using my engine hoist to assist  ;) .
Title: Re: Pulling Trany
Post by: steve1973 on August 16, 2020, 12:06:22 PM
I've done this many times without removing the engine. I even did a one day clutch change. That was a very long day but can be done. I can send you my clutch alignment tool if you need it. Give me a call, I left a message on your phone. Good luck!!

https://forums.g503.com/viewtopic.php?f=24&t=224478

Steve A.
Title: Re: Pulling Trany
Post by: coreyelliott on August 16, 2020, 03:20:34 PM
Yep, we left the transmission and transfer case married when we did ours.

Corey
Title: Re: Pulling Trany
Post by: yd328 on August 16, 2020, 05:57:09 PM
Along with the clutch alignment tool you can also get some long bolts for the bell housing. Cut the heads off of the bolts. Now you have some studs to help guide it back together.

Gary
Title: Re: Pulling Trany
Post by: mkoloc on September 03, 2020, 11:53:55 AM
Some pics of my progress:

(https://i.postimg.cc/s1rfgDtM/IMG-20200902-101100.jpg) (https://postimg.cc/s1rfgDtM)

 (https://i.postimg.cc/hJLwygMY/IMG-20200902-154806.jpg) (https://postimg.cc/hJLwygMY)

(https://i.postimg.cc/p9CC5dsP/IMG-20200902-101120.jpg) (https://postimg.cc/p9CC5dsP)

(https://i.postimg.cc/T5LJsJfP/IMG-20200902-101030-1.jpg) (https://postimg.cc/T5LJsJfP)

(https://i.postimg.cc/mt7QFDrK/IMG-20200902-153858-1.jpg) (https://postimg.cc/mt7QFDrK)

(https://i.postimg.cc/9wbCvZpv/IMG-20200902-122426.jpg) (https://postimg.cc/9wbCvZpv)

(https://i.postimg.cc/TKMvCkfp/IMG-20200902-102257.jpg) (https://postimg.cc/TKMvCkfp)

(https://i.postimg.cc/HcKhjxLV/IMG-20200902-101203.jpg) (https://postimg.cc/HcKhjxLV)

(https://i.postimg.cc/wtjfVJy1/IMG-20200902-101230.jpg) (https://postimg.cc/wtjfVJy1)