halftrackinfo

fuel system => carburetor and linkage => Topic started by: cal.50 on September 04, 2022, 12:02:51 PM

Title: fuel level adjustment
Post by: cal.50 on September 04, 2022, 12:02:51 PM

Hello

How do I have to adjust my float to have the correct fuel level.
( I do not have a gauge for)

Thanks
Andy

Title: Re: fuel level adjustment
Post by: Jesse on September 04, 2022, 12:59:38 PM

It should be close to level in the up position.

Title: Re: fuel level adjustment
Post by: brit plumber on September 05, 2022, 01:06:12 PM

I believe they are normally matched between gauge and sensor for calibration. I don’t think there’s an easy way to adjust the float to correspond with the reading on the gauge.

Title: Re: fuel level adjustment
Post by: coreyelliott on September 06, 2022, 09:42:51 AM

There is a screw/plug in the side of the carb body that you can remove to check the fuel level in the bowl. Just an FYI that my help you out while doing this. Unfortunately, I don't know the measurements for the floats off the top of my head.

Corey

Title: Re: fuel level adjustment
Post by: cal.50 on September 06, 2022, 11:01:55 PM

Thanks for your help, I will try it at the weekend