halftrackinfo

armor plate => fenders, door hardware and other body parts (non armor) => Topic started by: dwhite on January 29, 2024, 03:50:33 PM

Title: Floor Pan Question
Post by: dwhite on January 29, 2024, 03:50:33 PM

I've been cleaning up the lower toe kick panel that the accelerator pedal attaches too.  Looks like there were a couple of holes, underneath the pedal close to the pass-through for the accelerator rod, that were welded up.  Not sure if someone punched holes in the panel and later on someone else welded them up, or is there something missing.  Appreciate your help.  Thanks,
DW

Title: Re: Floor Pan Question
Post by: mfrance on January 29, 2024, 05:53:43 PM

Should have 1 bolt hole for accelerator pedal base  2 smaller holes 1 on each side of that for the tabs off the pedal base to keep pedal base from moving around. Then the pedal rod hole to go to pivot on firewall for carburetor linkage

Title: Re: Floor Pan Question
Post by: dwhite on February 01, 2024, 04:15:12 PM

Thanks for replying.  Guess I've got the standard holes plus a couple of civilian holes (filled in now).