halftrackinfo
seats => all seat topics => Topic started by: T26E4 on December 31, 2025, 12:01:32 AM
-
Does anyone have handy measurements for the base for the two back-to-back "aisle" seats (as I'd call them)?
Thanks a ton!
-
I have a set of the seats for my M2. I can dig them out this weekend and get pictures and mesurments for you.
-
Thank you SO MUCH!
Earlier I needed dimensions for the M2A1's rear bumpers and forum members gave me exactly what i needed. I appreciate this page so much!
-
This site has been a huge help with my build. Very greatful to Steve for putting it together and everyone that contributes. My track gets put on hold a lot do to other projects and priorities but some day i will get there and a lot of it is thanks to the freindly helpfull people of the halftrack community!
-
Here are the drawings for the center seat. Not museum quality but I doubt anyone would notice without a tape-measure. All the parts are 3/32" with 1/4 radius bends. Drawing B will need o have a mirror duplicate for the right side. The 6 holes in the seat pan are for the cast seat brackets to be riveted to. I don't know the exact size of the holes so I just made them 1/4". If there are any missing dimensions or if anything doesn't look right let me know and I'll fix it.
-
Pictures of the seat framea. I have 2 that are slightly diferent. Not sure which is older.
-
Great info!!