halftrackinfo

drive train => engine => Topic started by: andy on May 01, 2012, 08:48:56 PM

Title: Rear motor mount
Post by: andy on May 01, 2012, 08:48:56 PM

Hey guys, anyone have a clear pic of the rear engine mount. When i got my track the previous owner took out the original engine, but he left one rear mount assembly in the frame mount. It consisted of a small rubber mounted under the frame mount, a metal cup and bigger rubber bushing on top of that between the engine mount and frame mount. I got new mounts but there is no metal cup and was told its not needed?

Andy

Title: Re: Rear motor mount
Post by: steve1973 on May 01, 2012, 09:18:51 PM

Andy,
I will try and get you one tomorrow from Don's halftrack. Any particular side, or both?

Steve A.

Title: Re: Rear motor mount
Post by: andy on May 01, 2012, 09:34:39 PM

Thanks Steve. Either rear side. I just need to know if the upper rubber mount has a metal cup

Title: Re: Rear motor mount
Post by: steve1973 on May 02, 2012, 08:28:43 PM

Andy,
Here are some pictures I took today.

(http://www.surfacezero.com/g503/data/500/medium/100_5864.jpg)

(http://www.surfacezero.com/g503/data/500/medium/100_5863.jpg)

Hope this helps.

Steve A.

Title: Re: Rear motor mount
Post by: andy on May 02, 2012, 08:57:37 PM

Thats great!
There is a steel cup. I will reuse mione with the new mounts i had gotten.
Thanks!

Andy

Title: Re: Rear motor mount
Post by: steve-0 on May 02, 2012, 09:24:42 PM

your castle nuts are upside down.  ;D

Title: Re: Rear motor mount
Post by: steve1973 on May 03, 2012, 12:01:46 AM

Just checking to see if anyone would notice. ;D