halftrackinfo
classified ads => halftracks and parts for sale => Topic started by: Outsider on May 06, 2012, 09:55:28 AM
-
Took a road trip yesterday:
(http://i1059.photobucket.com/albums/t427/sverburg/DSCN2395JPEGof.jpg)
On the back is a M15A1 and in the belly is a M2. If you see something you need let me know as I am selling these off as parts.
(http://i1059.photobucket.com/albums/t427/sverburg/DSCN2397JPEGof.jpg)
(http://i1059.photobucket.com/albums/t427/sverburg/DSCN2396JPEGof.jpg)
(http://i1059.photobucket.com/albums/t427/sverburg/DSCN2399JPEGof.jpg)
(http://i1059.photobucket.com/albums/t427/sverburg/DSCN2398JPEGof.jpg)
M2 frame is streched AND bent. M15A1 frame is repairable and also has a Michigan ORV title with it.
Steve
-
Steve,
I would like to get the blackout hdlp resistor off the M2.
Kevin
-
How bad is the glove box, and can you get it out? Mine was cut.
One of the few, Frank USMC RET
-
Frank, There is a rust hole in the bottom at the back about 1 1/2" x 3 ". It's currently got about an inch of "stuff" in the bottom of it except for where the hole is of course. So I don't know what the rest of the bottom's condition is. Dash is junk so getting out the box wouldn't be hard.
Steve
-
Steve,
I'm in need of the early style blackout light bracket mounted on the side of the radiator if it still has it.
Thanks,
Steve A.
-
Steve,
Sorry, no blackout light bracket. As a matter of fact no light brackets at all we on them when I got the pair.
Steve
-
I could use the hood side panels and some of the radiator armor.
Although shipping might cost a fortune?
-
steve,, how much for a driverside, drive axle, axle.. i need one for "OLDRED"
(http://i867.photobucket.com/albums/ab239/meatball427/M2%20M2A1%20HALFTRACK/HALFTRACKM2A16.jpg)
(http://i867.photobucket.com/albums/ab239/meatball427/M2%20M2A1%20HALFTRACK/HALFTRACKM2A117.jpg)
-
(http://i867.photobucket.com/albums/ab239/meatball427/M2%20M2A1%20HALFTRACK/HALFTRACKM2A116.jpg)
-
You looking for just the axle shaft? Or do you need a hub too?
Steve
-
Steve,
Either of those come with a pintle hitch ? (can't see the back in the pics)
Thanks,
Phil.
-
Nope, no pintle hitches.
Steve
-
Steve,
Email sent on the map light in dashboard.
Reg
Hinrik
-
thanks for the axle for "big RED" ;D ;D
later, jc
-
Hi Steve,
I'm interested in the m15 cab bulkhead and also the perimeter rail portion over the cab if you still have them.
Thanks!
Clint
-
Have been disassembling these as I have time. I put a bunch of parts on eBay that no one here asked about. They are listed here if you want to see if you need any of these parts
http://www.ebay.com/sch/mmpsyt/m.html?item=140794505035&sspagename=STRK%3AMESELX%3AIT&rt=nc&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562
I can deliver parts to the Thunder over Michigan air show the first weekend in August and the Hallsville, OH / Off Road Floater show at the end of August if that will help anyone,
Thanks,
Steve
-
Hey Steve, did you ever find a good rear pivot shaft for me?
Also looking for the rear parking brake mount and 3 bolts. At some point it broke and someone welded a big nut on, i guess it worked but looks like crap
Andy
Have been disassembling these as I have time. I put a bunch of parts on eBay that no one here asked about. They are listed here if you want to see if you need any of these parts
http://www.ebay.com/sch/mmpsyt/m.html?item=140794505035&sspagename=STRK%3AMESELX%3AIT&rt=nc&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562
I can deliver parts to the Thunder over Michigan air show the first weekend in August and the Hallsville, OH / Off Road Floater show at the end of August if that will help anyone,
Thanks,
Steve
-
Andy,
The one I have taken apart so far is the right side and it has some wear to it. I have read posts before where if you switch the right and left sides around you basically have new wear surfaces, but for it to be perfect it would have to be machined and sleeved. Let me know if that will work for you.
Thanks,
Steve