halftrackinfo

drive train => drive lines => Topic started by: col.halftrack on January 13, 2014, 09:06:47 AM

Title: Rear U-Joint
Post by: col.halftrack on January 13, 2014, 09:06:47 AM

 Anyone replace their rear jackshaft u-joint. Manual shows a Spicer 5-16x Spicer but the cap diameter on that through Spicer is 1.875 and I think it should be 1.937.

Title: Re: Rear U-Joint
Post by: steve-0 on January 14, 2014, 06:19:16 PM

i dont know of a replacement but if you need a used one, i have drivelines that where lengthened that i could take a u joint from for ya.

Title: Re: Rear U-Joint
Post by: col.halftrack on January 15, 2014, 08:16:35 AM

 Thanks Steve I really just need the cap diameter or the yoke hole size dimension. I have some u-joints that I am unsure of. I have several new drive-shaft assemblies but do not want to take them apart just to check this out.

Title: Re: Rear U-Joint
Post by: steve1973 on January 15, 2014, 09:41:20 PM

Hello Kevin,
I pressed out a cap this morning and it measures 1.875. Hope this helps. Do you by chance have a replacement part number for this?

Steve A.

Title: Re: Rear U-Joint
Post by: ida34 on August 02, 2015, 10:33:46 AM

Napa part number PUJ 333. It lists for $69.99 as of the date of my post. Below is the specks and other part numbers from the Napa Website. I like the note about what it fits. "Many"



Fitment Dimension : 5.31" Between Plates

Fits Bearing Dimension : Diameter 1.875"

Grease Fitting Location : Between Trunions

Original Equipment Series : Spicer 1610

Replaces OEM Name & # : Spicer 5116X, 516X, 52792X, 5279X

U-Joint Bearing Type : Round w/ Welded Plate

Contents : 1 U-Joint, 8 Cap Screws, 4 Lock Plates, 2 Grease Fittings

Vehicles : Many

Title: Re: Rear U-Joint
Post by: col.halftrack on August 06, 2015, 07:48:11 AM

 I have these for $38.00 if anyone else is hunting them.
 

Title: Re: Rear U-Joint
Post by: steve-0 on August 07, 2015, 12:15:07 PM

thanks for the numbers ida34

here is the complete cross list.

1610 SERIES

 
CROSS REFERENCE
MIDLAND LP2300279
AEC: AE-516, AE-516Z
BORG WARNER: 114-516
MOTOR MASTER ZELLER: 5200A, 5200AG
NEAPCO: 4-0058, 4-0279
PRECISION-TORK: 333
ROCKWELL: CP16N1, CP16N3
SPICER DANA: 5-279X
TRW: 20134 
1-01-B-02-01
T Components UJ333
ACDelco 45U2321
GM 89029435
GMB 230-0279

http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=333+u-joint&_sop=15

http://www.ebay.com/sch/i.html?_odkw=279x+u-joint&_sop=15&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X5-279x+u-joint.TRS0&_nkw=5-279x+u-joint&_sacat=0

http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=Neapco+4-0279&_sop=15



as many of you know gary goes after anyone trying to sell halftrack parts, thats why he is usually the only HT dealer posting parts on the G.
he posted his u-joints today on the G most likely because of this post.

so I'm posting this info in response to gary and not to undercut col.halftrack