halftrackinfo

general discussion => what's on your mind? => Topic started by: HenryVIII on March 07, 2014, 06:52:24 PM

Title: footman loop locations
Post by: HenryVIII on March 07, 2014, 06:52:24 PM

Hi Guys, I am going to be drilling the holes in the side armor for my m3. I have most of the measurements for the holes, but I do not know the dimensions for the footman loops. I know they are 8" down from the top , but do not know the spacing. There are 7 loops on the 2 large side pieces for each side. I have the door post measurements.  If someone has or could take a tape measure from the rear corner foreward and note the screw hole locations it would help a lot.   Thanks, Henry

Title: Re: footman loop locations
Post by: Outsider on March 08, 2014, 08:31:04 AM

Hope this helps. This is where I put mine on my HT.

(http://i1059.photobucket.com/albums/t427/sverburg/DSCN3360_zpsb1c338de.jpg)

Steve

Title: Re: footman loop locations
Post by: HenryVIII on March 08, 2014, 10:17:19 PM

Steve, Thanks. That is exactly what I need.   Henry