halftrackinfo

armor plate => Accessories => Topic started by: Torque on May 12, 2014, 10:54:37 AM

Title: M2 ammo locker drawings
Post by: Torque on May 12, 2014, 10:54:37 AM

I was going to leave the ammo lockers out but every time I finish something I think that wasn't too bad and add to the list of stuff to do.... So..... I may tackle them. Anyone have the drawings for the M2 lockers? Maybe these are in Bob's drawings?

Title: Re: M2 ammo locker drawings
Post by: steve1973 on May 12, 2014, 04:42:00 PM

Check with Tom Gunther, RocnTJ. He made my set and are very nice. He also does M2 luggage racks.

Title: Re: M2 ammo locker drawings
Post by: bright87 on May 13, 2014, 12:14:33 AM

All I found in Bobs drawings was the door, which I will post,
Michael

Title: Re: M2 ammo locker drawings
Post by: bright87 on May 13, 2014, 12:18:48 AM

I need a pair M2 boxes built or at least measurements!
Mihael

Title: Re: M2 ammo locker drawings
Post by: steve1973 on May 13, 2014, 01:08:43 AM

Like I said above, Give Tom a buzz. he has the drawinga or can make you a set. See post below:

http://halftrackinfo.com/index.php?topic=562.msg2487#msg2487

I have a set and are very nicely made.

Steve A.

Title: Re: M2 ammo locker drawings
Post by: Torque on May 13, 2014, 08:07:10 AM

Are the left and right ammo lockers on the M2 the same? The right on the M2A1 is shorter I think. I have not found any pictures of the M2 lockers with the doors open or from the top to understand how they are made.    Barry

Title: Re: M2 ammo locker drawings
Post by: steve1973 on May 13, 2014, 11:21:27 AM

If it is an M2 then yes they are the same. If it is an M2A1 then no, the one on the Passenger side is half the size due to the pulpit. The extra space is for standing. Also, if you have a radio and depending on it's configuration then you may loose the Driver's side locker box in place of a SCR-508 on a FT-284 stand in a CH-74 cabinet for example.

Steve A.