halftrackinfo

classified ads => halftracks and parts for sale => Topic started by: col.halftrack on June 13, 2014, 08:27:53 AM

Title: FS Half-Trac pedal/lever draft pad kits @MVPA 2014
Post by: col.halftrack on June 13, 2014, 08:27:53 AM

Roger and I will have several draft pad kits for White/DiaT or Autocar with us at the MVPA convention. These sell for $45.00 so get them there and save by not paying shipping.

Title: Re: FS Half-Trac pedal/lever draft pad kits @MVPA 2014
Post by: steve1973 on June 13, 2014, 01:31:42 PM

I would like a set of draft pads. along with the hood pads. I bought a set a while back and was missing all the metal pieces. I found this out when helping Don install his. Do you have extra metal pieces to?  I will not be at the show. How can I get them?

Thanks,
Steve A.

Title: Re: FS Half-Trac pedal/lever draft pad kits @MVPA 2014
Post by: col.halftrack on June 13, 2014, 03:16:02 PM

 Steve,
 I can take your order no problem. My thoughts on the metal pieces you refer to.... were these the strips of metal used to backup the rivets on the backside of the floor panels? The White/DiaT sets will not have these. The Autocar set will have metal backing strips. Going by the original flooring it seems that White and DiaT simply used a washer to backup the rivet while Autocar had these strips. I should be able to send you a set but need to have at least a couple samples for the convention.
 Kevin

Title: Re: FS Half-Trac pedal/lever draft pad kits @MVPA 2014
Post by: steve1973 on June 13, 2014, 05:12:04 PM

The metal pieces are the ones for the draft seals on the brake and clutch peddles. They have various steps bent into them also.

Steve A.