halftrackinfo

armor plate => international rear armor and bed => Topic started by: JamieM5halftrack on December 08, 2020, 06:46:12 AM

Title: M5 Rear Armour
Post by: JamieM5halftrack on December 08, 2020, 06:46:12 AM
Hi all,

I am currently making the rear armour for the back of my international. I am after the hole positions that bolt the rear armour to the body. I’m also looking for the hole spacings for the hood bows and how the hood bows fit as I’m sure that White and International are different.
Any help would be greatly appreciated.
Title: Re: M5 Rear Armour
Post by: Smadge on December 08, 2020, 09:07:36 AM
Take a photo of the rear body/frame.  I would think that the M5 would have the 8 mounts (4 on each side) where the bed attaches.

Paul
Title: Re: M5 Rear Armour
Post by: JamieM5halftrack on December 08, 2020, 11:21:32 AM
Here is a picture of the rear that I currently have.
Title: Re: M5 Rear Armour
Post by: mfrance on December 08, 2020, 12:37:21 PM
Ibiblio › USA › ref › pdfsPDF
BASIC HALF-TRACK VEHICLES (fflC) - Ibiblio
Title: Re: M5 Rear Armour
Post by: Jesse on December 09, 2020, 08:35:19 AM
This is from an M9A1. We have a bunch of cut up armor and top rail. We can probably eventually figure out the top bow spacing.
Title: Re: M5 Rear Armour
Post by: JamieM5halftrack on December 09, 2020, 09:28:33 AM
Hi Jessie,

Thanks for that information. That’s a great help.