Perimeter rail

[emptyhead]

Anyone have pics of rear part of the perimeter rail need to see how the 90 degree is set up and if it’s gussets also if how the rail is cut buy the rear door. Thanks

[Robert Cassin]

Do I have go out in the rain and take a few pics for you?

[emptyhead]

I won’t send you out in the rain no rush job rob. Thank you sir.

[Dinadin]

I don't have pictures right now, but the 90 degree corner is made with two pieces cut at 45 with a gusset underneath.  The ends by the door is also cut at a 45. on the top.

[Darth_Kitten]

From Rich's HT

[8683jb]

This is the rear corner of my M2A1 David (can't help on the door!). I don't know if they're the same as an M3. They're welded, plug-welded and bolted together. I have another front of a perimeter rail and the corners on that have an additional gusset bolted over the top of this configuration but I don't know if the rears are like that.

Jon




Underside:

[emptyhead]

Thank you very much gentleman that helps a lot.

[Dinadin]

Just so you know, mine is a 1942 M3 made by Diamond T, that is all original.  Thank you Darth Kitten for sharing the picture for me.