Author Topic: Wiper arms  (Read 2007 times)

emptyhead

  • Hero Member
  • *****
  • Posts: 625
Wiper arms
« on: August 06, 2022, 01:46:44 PM »
It don’t know how I manage to get this far with my halftrack rebuild and not be able to figure out how to install wiper arms. Anyone got any pointers. I’m going to blast ant paint them but can’t figure out how they go on.

Jesse

  • Full Member
  • ***
  • Posts: 122
Re: Wiper arms
« Reply #1 on: August 06, 2022, 04:19:40 PM »
100+ year old technology. Take the sheet metal cover off the end and slide it away from the end. The small diameter wire bent at a 90degree goes into the hole in the wiper motor shaft. Then the sheet metal covers both the arm, and the end of the wiper arm.

Jesse

  • Full Member
  • ***
  • Posts: 122
Re: Wiper arms
« Reply #2 on: August 06, 2022, 04:22:15 PM »
The small half moon clip inside the sheet metal cover goes into the slot around the end of the wiper motor shaft. It’s so simple it hard.