Author Topic: White engine transmission transfer case and other parts for sale in TX  (Read 6280 times)

Jason Barnett

  • Newbie
  • *
  • Posts: 12
    • Website showing my artwork and projects
I recently purchased the remains of an M3 Autocar with a White engine. The vehicle is being repowered and the stuck White flat head six engine , transmission, and transfer case are for sale. I will also be pulling the gears and axle shafts out of the front axle as the four wheel drive will never be used. I have no clue as to what this stuff is worth, so make me an offer. I can strap it all to a pallet it drop it off at a shipping terminal in Houston TX. You must make arrangements for the shipping. I can also pull just the parts you need. I want to make sure this stuff helps another half track live on.  Jason (713) eight/one/seven-8997
   I'm in need of the passenger side hood armor, the doors , and combat wheels.












 
Artist/aviation artist www.jasonbarnett.net

bright87

  • Full Member
  • ***
  • Posts: 142
Re: White engine transmission transfer case and other parts for sale in TX
« Reply #1 on: November 11, 2013, 07:52:56 PM »
Sent PM

O.D. HOG

  • Newbie
  • *
  • Posts: 21
Re: White engine transmission transfer case and other parts for sale in TX
« Reply #2 on: November 12, 2013, 03:26:41 AM »
PM sent

Jason Barnett

  • Newbie
  • *
  • Posts: 12
    • Website showing my artwork and projects
Re: White engine transmission transfer case and other parts for sale in TX
« Reply #3 on: November 16, 2013, 10:29:26 PM »
I still have no takers yet on these parts! I opened the top of the transmission and the gear are not broken, but there is mild rust on them(the picture makes them look worse than they are). They should clean up nicely with a bead blaster. The transmission rotates.
  I removed the head last night and was pleasantly surprised at the condition of the engine. The engine set for some time without a carburetor, but there is only minor moisture pitting on number 4 cylinder. The ridge in the cylinders is almost no existent. I believe that if the engine was taken apart, the cylinders were honed, a new set of rings were installed and if a valve valve job was performed, the engine would run without trouble. I refreshed many low compression antique car and tractor engines like this one that had far worse damage to the cylinders and they never smoked or lost compression, so I'm pretty confident in this engine. The oil is black and does not have water in it. The engine does not roll over. I suspect that is due to stuck valves.
  CALL Jason (713) 817-8997 $500 and the engine , transmission, transfer case and front drive shaft is yours. Come and get it, or I can strap this stuff to a pallet and drop it off at a shipping terminal in HOUSTON TX if you arrange for shipping.









« Last Edit: November 16, 2013, 10:55:35 PM by Jason Barnett »
Artist/aviation artist www.jasonbarnett.net

bright87

  • Full Member
  • ***
  • Posts: 142
Re: White engine transmission transfer case and other parts for sale in TX
« Reply #4 on: November 16, 2013, 11:44:39 PM »
Send another PM

Jason Barnett

  • Newbie
  • *
  • Posts: 12
    • Website showing my artwork and projects
Re: White engine transmission transfer case and other parts for sale in TX
« Reply #5 on: November 17, 2013, 03:04:30 AM »
sale pending to Bright 87
Artist/aviation artist www.jasonbarnett.net

FrankUSMC

  • Full Member
  • ***
  • Posts: 105
Re: White engine transmission transfer case and other parts for sale in TX
« Reply #6 on: November 17, 2013, 11:04:23 AM »
Glad to hear they are being saved. When I saw your name again on your post, I was prying I would not be reading, "taking the parts to the scrap man".
One of the few, Frank USMC RET

bright87

  • Full Member
  • ***
  • Posts: 142
Re: White engine transmission transfer case and other parts for sale in TX
« Reply #7 on: November 28, 2013, 01:19:01 AM »
The scrap man would have loved this one, because it is HEAVY!!!
« Last Edit: November 30, 2013, 11:41:30 PM by bright87 »