halftrackinfo

exhaust system => all exhaust related topics => Topic started by: emptyhead on October 04, 2015, 04:30:45 PM

Title: Exhaust bracket
Post by: emptyhead on October 04, 2015, 04:30:45 PM

Do any of you guys have a pic of where this bracket goes . I can't seem to make it fit from the frame to the exhaust system. Is it bent. Thanks
(http://i292.photobucket.com/albums/mm21/davidf121/image.jpg1_zps2cfbza39.jpg) (http://s292.photobucket.com/user/davidf121/media/image.jpg1_zps2cfbza39.jpg.html)
(http://i292.photobucket.com/albums/mm21/davidf121/image.jpg2_zpsybui0xmq.jpg) (http://s292.photobucket.com/user/davidf121/media/image.jpg2_zpsybui0xmq.jpg.html)

Title: Re: Exhaust bracket
Post by: RocnTJ on October 04, 2015, 08:40:39 PM

It is bent.   

If your exhaust is already installed you will need to loosen all of the joints and pry on the pipe to get the brackets in place.   Once you have them in place and clamps installed everything will line up when you tighten it up.


I just got done installing the brackets after my new exhaust had already been installed.

Tom

Title: Re: Exhaust bracket
Post by: yd328 on October 04, 2015, 08:41:44 PM

Here's a picture of mine, it had to be bent back. It holds the exhaust at the front of the muffler, not at the head pipe/muffler joint. There is another bracket further back by the axle for the tail pipe.

Gary
(http://www.surfacezero.com/g503/data/500/medium/Half_Track_085.jpg)

Title: Re: Exhaust bracket
Post by: prestone on October 05, 2015, 01:34:16 PM

Copy Exhaust support made for the M2

(http://img15.hostingpics.net/pics/439180IMG6245.jpg) (http://www.hostingpics.net/viewer.php?id=439180IMG6245.jpg)
 
copy and original
(http://img15.hostingpics.net/pics/114562IMG6248.jpg) (http://www.hostingpics.net/viewer.php?id=114562IMG6248.jpg)

Title: Re: Exhaust bracket
Post by: emptyhead on October 05, 2015, 02:46:44 PM

Thank you gentlemen that is great