halftrackinfo

exhaust system => all exhaust related topics => Topic started by: coreyelliott on May 12, 2020, 09:03:34 PM

Title: Exhaust pipe size
Post by: coreyelliott on May 12, 2020, 09:03:34 PM

Is the exhaust pipe 2" from beginning to end, or does it downsize at some point?  I know it's 2" diameter coming out of the exhaust manifold, but wasn't sure if it went smaller after the muffler somewhere.  Not sure that 2" pipe will fit through the very end holder/clamp at the bogie arm.

Thanks!

Corey

Title: Re: Exhaust pipe size
Post by: steve1973 on May 12, 2020, 09:16:40 PM

Kevin Lockwood sells the complete kit with all the hardware you need. Everything is pre bent and fits perfectly. His prices are very reasonable to.

Steve A.

Title: Re: Exhaust pipe size
Post by: coreyelliott on May 13, 2020, 12:30:22 PM

I know Kevin makes a fantastic replacement; however, I have already fabbed our exhaust up to the muffler and only need to bend up the tailpipe.  Just wanted to see if the size drops down after the muffler or not.

Corey

Title: Re: Exhaust pipe size
Post by: steve1973 on May 13, 2020, 05:14:53 PM

I measured the OD of my tailpipe and is 2-1/4". Diameter should be the same on both sides of the muffler.

Steve A.

Title: Re: Exhaust pipe size
Post by: coreyelliott on May 13, 2020, 07:21:17 PM

Thanks Steve!

Corey