halftrackinfo

armor plate => fenders, door hardware and other body parts (non armor) => Topic started by: yd328 on November 25, 2020, 10:21:30 AM

Title: Spare Pedastal Holder Bumpers?
Post by: yd328 on November 25, 2020, 10:21:30 AM

Does anyone have a source for these? The only ones that I can find are for a 1/8" hole, the holes in my brackets are 1/4".
(http://www.surfacezero.com/g503/data/500/medium/IMG_55785.JPG)

Thanks Gary

Title: Re: Spare Pedastal Holder Bumpers?
Post by: 8683jb on November 25, 2020, 02:54:28 PM

This is from RocnTJ post http://halftrackinfo.com/index.php?topic=562.msg6479#msg6479

Auveco 4281 bumpers

http://216.38.6.33/product963.html

Hope it helps.

Title: Re: Spare Pedastal Holder Bumpers?
Post by: yd328 on November 25, 2020, 08:44:14 PM

Thanks for the link Jon.

Gary

Title: Re: Spare Pedastal Holder Bumpers?
Post by: pyropanzer on November 26, 2020, 04:08:53 PM

Try mcmastercarr.com that's where I got mine.  They are the same size as my originals.

Title: Re: Spare Pedastal Holder Bumpers?
Post by: yd328 on December 07, 2020, 08:40:56 AM

I got a little crazy and ended up getting the two types listed above. I have 1/4" mounting holes in my brackets, the brackets are originals. The McMaster bumpers are for a 1/8" mounting hole. The part number is 9310K124. Fit is a little loose but all the rest is the same as the original. The other that I tried from the link above is a little taller but the fit is good. That one I found to be a GM trunk bumper/stop. The part number from OER is 4721222. That is available from many auto restoration companies, also Summit racing and Jegs. I am going with the McMasters and will use a dab of silicone to help hold them tight.
(http://www.surfacezero.com/g503/data/500/medium/IMG_5606_LI.jpg)
(http://www.surfacezero.com/g503/data/500/medium/IMG_56093.JPG)