halftrackinfo

electrical system => wiring harnesses => Topic started by: steve-0 on November 19, 2011, 12:33:36 PM

Title: Uninsulated Steel Closed Clamps
Post by: steve-0 on November 19, 2011, 12:33:36 PM

the original clamps where uninsulated.
these are the only sizes i have been able to find so far in uninsulated.
http://www.clipsandfasteners.com/Uninsulated_Steel_Closed_Clamps_s/679.htm

insulated type
http://www.clipsandfasteners.com/Clamps_Hose_Tubing_s/61.htm

Title: Re: Uninsulated Steel Closed Clamps
Post by: Tapper02 on January 25, 2012, 07:58:23 PM

I need 2 each of Clamp 1 and 2...and I think I can get them from the source you mentioned.  However, I also need three of Clamp 7...any idea where I can find these?  I've done a google search but didn't turn up anything that is elongated like the clamp required.

(http://i60.photobucket.com/albums/h39/Tapper02/Misc%20Shared%20Pics/scan0011rev.jpg)

-Tom

Title: Re: Uninsulated Steel Closed Clamps
Post by: Tapper02 on January 27, 2012, 09:48:15 PM

Never mind...I bought a "Hardware Bag", per the manual, from Robin Bartel...includes all the needed wire clamps.  Problem solved!

-Tom

Title: Re: Uninsulated Steel Closed Clamps
Post by: col.halftrack on January 28, 2012, 12:39:16 PM

 How does one contact "Robin Bartel"???

Title: Re: Uninsulated Steel Closed Clamps
Post by: Tapper02 on January 28, 2012, 04:07:54 PM

He's on the G503 forum...username "Robin".  You can PM him from there.

-Tom