halftrackinfo

armor plate => fenders, door hardware and other body parts (non armor) => Topic started by: judyron on December 20, 2013, 07:45:41 PM

Title: No Volt Meter?
Post by: judyron on December 20, 2013, 07:45:41 PM

Started working on my dash and pulling all parts out and noticed that my track does not have a volt meter.  Did not pay any attention before until I pulled off the smaller data tag and noticed the gauge hole behind the tag.  My track is a M2 rebuilt by E.W. Wyllie Co. to a M2A1, did all tracks get volt meters or was this something deleted in the rebuild?

Ron

Title: Re: No Volt Meter?
Post by: spec4don on December 22, 2013, 07:39:52 PM

My M3 had the volt meter removed. The cover plate covered the hole for the switch and the gauge hole. Mine was refurbed in the 50's. I think. Take a look at super tracks last post he has pictures of 4 dash boards not a volt meter an any of them.
Don G.

Title: Re: No Volt Meter?
Post by: 47lincsled on March 10, 2014, 08:00:04 PM

 The two half-tracks I parted out when I built mine both had covers where the voltmeter was supposed to be, they were both rebuilt by B&M, the only time you really needed a voltmeter is if you had a radio set.