halftrackinfo

armor plate => m2/ m2A1 rear armor and bed => Topic started by: bright87 on May 17, 2014, 01:57:56 AM

Title: M2 front platform plates
Post by: bright87 on May 17, 2014, 01:57:56 AM

Hello all-
Does any one have the dimensions for the three plates that make up the front platform on a M2?
The two side plates sit partially under the ammo boxes, and the center is diamond plate.
Thanks-Michael

Title: Re: M2 front platform plates
Post by: steve1973 on May 17, 2014, 04:06:31 AM

I will try and get measurements today. The two outer plates are part of the main floor. The driver's side plate has a hole in it for power wires for the radio to pass through to a junction box in the storage locker. Here are some photos that I had on file in the G503 albums. I will get more photos.

front -->
(http://www.surfacezero.com/g503/data/500/medium/DSCN0728.JPG)

(http://www.surfacezero.com/g503/data/500/medium/DSCN07071.JPG)

Steve A.

Title: Re: M2 front platform plates
Post by: bright87 on May 17, 2014, 07:19:02 AM

Thanks Steve! I was wondering what that square hole was for.

Title: Re: M2 front platform plates
Post by: steve1973 on May 17, 2014, 03:28:54 PM

Here you go.

(http://www.surfacezero.com/g503/data/500/medium/DSCN19041.JPG)

(http://www.surfacezero.com/g503/data/500/medium/DSCN18961.JPG)

(http://www.surfacezero.com/g503/data/500/medium/DSCN18982.JPG)

(http://www.surfacezero.com/g503/data/500/medium/DSCN18971.JPG)

Hope this helps.

Steve A.

Title: Re: M2 front platform plates
Post by: Torque on May 17, 2014, 05:13:06 PM

Thanks Steve, just what I needed. Are they all 1/8"?
   Barry

Title: Re: M2 front platform plates
Post by: steve1973 on May 17, 2014, 05:29:55 PM

I believe so.

Title: Re: M2 front platform plates
Post by: bright87 on May 17, 2014, 06:22:35 PM

Thanks Steve-now i can get to work!

Title: Re: M2 front platform plates
Post by: Sprouse on December 27, 2016, 04:12:30 PM

steve do you have the lower bed measurements? track armor and compartments?

Title: Re: M2 front platform plates
Post by: steve1973 on December 27, 2016, 07:38:46 PM

I have CAD files for all the rear side armor. I'm working with someone to convert them into drawings also. I will try to have something posted by spring.

Steve A.