rear bed canvas bow attachment points

[andy]

Hi guys, Im trying to figure out what bracket is used to attach the top canvas bows under the toprail. I have seen little t shaped brackets that are bolted/welded to the inside armor,  and others I have seen a bracket of flat metal welded on under the upper perimeter rail. I see gary has the t fittings. What setup do you guys have?

Andy

[steve1973]

Andy,
It varies depending the model of halftrack you have and what rebuilds they have been through. I have a M2 converted to an M2A1 and have seen at least two variants for top bow mounts. What model halftrack do you have?

Steve A.

[andy]

Thanks for the reply Steve,
Actually it is an M2A1. It is a complete repro rear section so im starting from scratch with no holes except in the upper rail where bows go thru for mounting

[Torque]

I need this info also and the hole locations in the rail.

[andy]

I got the t brackets that mount on the wall but i have no pre drilled holes. I have the m2a1, i know where the half bow at the front goes, any one have the floor to bow height for the middle and rear. Also on the rear, its tilted back?

Andy