Author Topic: Iowa M2 (Read 49496 times)

Torque · « **on:** April 13, 2014, 06:43:59 PM »

I am going to try a picture.

[attachment deleted by admin. sorry all images over 3000 kb where deleted automatically

FrankUSMC · « **Reply #1 on:** April 13, 2014, 06:48:54 PM »

Are you changing out the track on the drivers side or did it come off?
One of the few, Frank USMC RET

Torque · « **Reply #2 on:** April 13, 2014, 07:30:18 PM »

Was putting on a track to move it, it does not run, this was a year and a half ago. I have many pictures but one must be my limit, won't let me post more, just kicks me off line. I will try another day. Barry

spec4don · « **Reply #3 on:** April 13, 2014, 08:02:20 PM »

Hi Barry, hey resize your pictures. Down to 640 pixels. It will down load easier and faster. Want to see more pictures!!

Don G.

Torque · « **Reply #4 on:** April 15, 2014, 07:21:52 AM »

This is another picture of what I started with. It's an M3 but I cut off the bad back end and put on an M2 back from a parts machine with a bad frame.

spec4don · « **Reply #5 on:** April 15, 2014, 08:01:14 AM »

WOW, I thought I went deep! Looks like you have a project. Nice job on the frame splice.

Don G.

steve-0 · « **Reply #6 on:** April 16, 2014, 01:59:02 AM »

thanks for posting those pics.
we all should move to the same town

Torque · « **Reply #7 on:** April 16, 2014, 07:29:26 AM »

I am going to keep posting pictures of progress from the last year or so. Made some rear body brackets.

Torque · « **Reply #8 on:** April 17, 2014, 07:13:48 AM »

Like most, the roller was missing, so I made one. Only thing I had to go by when I built it was the pictures Steve-O posted.... so... it's not quite correct. Cut up square tube for the nice radius on the brackets. The tube I used for the roller had been in the iron pile for 40 years, not thick enough but will look OK. Replaced the center of the bumper while I was there.